Jeep CJs 1949-86 Automatic Transmission

Automatic Transmission
Component		Torque
cooler line fitting		15 ft. lbs.
front band adjustment screw	with adapter tool	3 ft. lbs.
front band adjustment screw	without adapter tool	6 ft. lbs.
front band adjustment screw locknut		35 ft. lbs.
gearshift rod trunnion locknut		9 ft. lbs.
linkage swivel clamp nut		4 ft. lbs.
manual lever-to-Shaft nut		8 ft. lbs.
neutral safety switch		24 ft. lbs.
oil pan bolts (Transmission)		12 ft. lbs.
rear band adjustment screw		4 ft. lbs.
rear band adjustment screw locknut		35 ft. lbs.
shift lever-to-Manual shaft		20 ft. lbs.
torque converter-to-Driveplate bolts		33 ft. lbs.
torque converter inspection cover bolts		8 ft. lbs.
Transmission-to-Engine Bolts		35 ft. lbs.
transmission-to-Transfer case bolts		20 ft. lbs.


(Click for bigger picture)
Fig. 1	Earlier Automatic Transmission Column Shifter Component Layout.

Fig. 2	4 Cylinder Throttle Cable-to-Transmission Adjustment.

Fig. 3	Typical Later 6 Cylinder Throttle Linkage-to-Transmission Adjustment.

Fig. 4	1982 And Later Throttle Linkage-to-Transmission Adjustment.
(Using special tool in this picture)
Fig. 5	Front Band Adjustment.

Fig. 5	Rear Band Adjustment