(Click
for bigger picture)
(Click
for bigger picture)
Firing Order 1-5-3-6-2-4.|
Automotive Torque Specifications |
||
| Home | Jeep | Jeep CJs 1949-86 |
Jeep CJs 1949-86
| In-Line 6 Cylinder Engine | ||
|---|---|---|
| Component | Torque | |
| air injection manifold screws | 1972-74 | 15 ft. lbs. |
| 1975-83 | 20 ft. lbs. | |
| air injection pump adjusting bolt | 20 ft. lbs. | |
| air injection pump mounting bolts | 20 ft. lbs. | |
| alternator bracket-to-Engine bolts | 23-30 ft. lbs. | |
| alternator pivot bolt | 23-30 ft. lbs. | |
| camshaft sprocket bolts | 45-55 ft. lbs. | |
| carburetor mounting nuts | 12-15 ft. lbs. | |
| crankshaft pulley-to-Vibration damper bolts | 20-25 ft. lbs. | |
| cylinder head bolts | 1972 | 80-85 ft. lbs. |
| 1973-80 | 105 ft. lbs. | |
| 1981-83 | 85 ft. lbs. | |
| Driveplate-to-Crankshaft bolts (Automatic) | 100-110 ft. lbs. | |
| driveplate-to-Torque converter bolts (Automatic) | 20-25 ft. lbs. | |
| EGR valve | 13 ft. lbs. | |
| exhaust manifold bolts | 20-25 ft. lbs. | |
| exhaust pipe-to-Exhaust manifold nuts | 18-28 ft. lbs. | |
| fan and hub assembly bolts | 15-25 ft. lbs. | |
| flywheel-to-Crankshaft bolts | 100-110 ft. lbs. | |
| fuel pump-to-Engine bolts | 13-19 ft. lbs. | |
| intake manifold bolts | 20-25 ft. lbs. | |
| main bearing cap bolts | 75-85 ft. lbs. | |
| oil pan bolts | 1/4" x 20 | 5-9 ft. lbs. |
| 5/16" x 18 | 10-13 ft. lbs. | |
| oil pump cover bolts | 1972 | 6-7.5 ft. lbs. |
| 1973-83 | 6 ft. lbs. | |
| oil pump mounting bolts | short | 8-12 ft. lbs. |
| Long | 15-18 ft. lbs. | |
| oxygen sensor | 31 ft. lbs. | |
| rocker arm shaft bolts | 1972 | 19-22 ft. lbs. |
| 1974 | 21 ft. lbs. | |
| bridged rocker arm pivot bolt | 1973, 1975 and 1976 | 21 ft. lbs. |
| 1977-83 | 19 ft. lbs. | |
| rod bearing cap nuts | 1972-76 | 26-30 ft. lbs. |
| 1977-83 | 33 ft. lbs. | |
| spark plugs | 22-33 ft. lbs. | |
| Starter motor-to-Bellhousing bolts | 15-20 ft. lbs. | |
| Thermostat housing-to-Engine bolts | 10-18 ft. lbs. | |
| vibration damper-to-Crankshaft bolt | 1972-76 | 50-60 ft. lbs. |
| 1977-83 | 80 ft. lbs. | |
| water pump bolts | 10-15 ft. lbs. | |
|
|
| Fig. 1 | Cylinder Head Bolt Torque Sequence-In-Line 6 Cylinder Engine. |
|
|
| Fig. 2 | Intake and Exhaust Manifold Torque Sequence-In-Line 6 Cylinder Engine. |
| (Click
for bigger picture) |
|
| Fig. 3 | Upper Engine Components-In-Line 6 Cylinder Engine. |
| (Click
for bigger picture) |
|
| Fig. 4 | Lower Engine Components-In-Line 6 Cylinder Engine. |
|
|
| Fig. 5 | Bridged Rocker Arm Components-In-Line 6 Cylinder Engine. |
|
|
| Fig. 6 | Shaft Type Rocker Arm Assembly-In-Line 6 Cylinder Engine. |
|
|
| Fig. 7 | Timing Chain Alignment-In-Line 6 Cylinder Engine. |
| Firing Order 1-5-3-6-2-4. |
|
| Fig. 8 | Firing Order and Cylinder Location-In-Line 6 Cylinder Engine. |
For images, go to www.torquespecs.com
|
|