Automotive Torque Specifications |
||
| Home | Geo | Geo Storm 1990-93 |
Geo Storm 1990-93
Engine
1.6L ( SOHC ) |
|||
|---|---|---|---|
| Component | Torque | ||
| Air Intake Plenum-to-Intake manifold Bolts | 17 ft. lbs. | ||
| Camshaft Sprocket-to-Camshaft Bolt(s) | 1990 | 43 ft. lbs. | |
| 1991-93 | 106 inch lbs. | ||
| Crankshaft Damper Bolt | 87 ft. lbs. | ||
| Crankshaft Pulley Bolts | 1990 | 89 inch lbs. | |
| 1991-93 | 17 ft. lbs. | ||
| Cylinder Head Bolts ( in sequence ) | Step 1 | 29 ft. lbs. | |
| Step 2 | 58 ft. lbs. | ||
| Exhaust Manifold Bolts and Nuts | 30 ft. lbs. | ||
| Flywheel/Driveplate Bolts | 1990 | Manual | 58 ft. lbs. |
| Automatic | 47 ft. lbs. | ||
| 1991-93 | Step 1 | 22 ft. lbs. | |
| Step 2 | Note | ||
| Idler Pulley Bolts | 22 ft. lbs. | ||
| Intake Manifold Bolts and Nuts | 17 ft. lbs. | ||
| Main Bearing Cap Bolts | 44 ft. lbs. | ||
| Oil Pan Bolts and Nuts | 89 inch lbs. | ||
| Oil Pump Bolts | 89 inch lbs. | ||
| Oil Pump Cover Screws | 89 inch lbs. | ||
| Oil Pump Relief Valve Plug | 27 ft. lbs. | ||
| Rear Main Oil Seal Retainer Bolts | 89 inch lbs. | ||
| Rear Mount Center Bolts | 76 ft. lbs. | ||
| Rear Mount-to-Transaxle Case Bolts | 37 ft. lbs. | ||
| Rocker Arm Bracket Bolts | 16 ft. lbs. | ||
| Rod Bearing Cap Nuts | 1990 | 36 ft. lbs. | |
| 1991-93 | Step 1 | 11 ft. lbs. | |
| Step 2 | Note | ||
| Throttle Body-to-Air Intake Plenum Bolts | 16 ft. lbs. | ||
| Timing Belt Cover Bolts | 31 ft. lbs. | ||
| Timing Belt Tensioner | 31 ft. lbs. | ||
| Valve Cover Bolts | 89 inch lbs. | ||
| Note | Tighten an additional 45 to 60 degrees. | ||||||||
 Fig.1 Cylinder head bolt torque sequence-1.6L ( SOHC ) |
 Fig. 2 Rocker arm bracket bolt torque sequence-1.6L ( SOHC ) |
 Fig. 3 Rocker arm bracket bolt loosening sequence-1.6L ( SOHC ) |
 Fig. 4 Timing mark alignment-1.6L ( SOHC ) |
 Fig. 5 Firing order and cylinder location-All |
 Fig. 6 Main bearing cap torque sequence-All |
For images, go to www.torquespecs.com
|
|