Automotive Torque Specifications |
||
Home | Subaru | Subaru Coupes Sedans and Wagons 1985-96 |
Subaru Coupes, Sedans and Wagons 1985-96
Engines
1.8L (1781cc) SOHC 4Cyl | ||
---|---|---|
Component | Torque | |
Camshaft Case Bolts | 13-14 ft. lbs. | |
Camshaft Sprocket Bolts | 7 ft. lbs. | |
Camshaft Support Bolts | 4.3-5.1 ft. lbs. | |
Crankshaft Damper Bolt | 66-79 ft. lbs. | |
Cylinder Head Bolts | Step 1 | 22 ft. lbs. |
Step 2 | 43 ft. lbs. | |
Step 3 | 47 ft. lbs. | |
Engine Mount-to-Crossmember Fasteners | 14-24 ft. lbs. | |
Exhaust Pipe-to-Engine Nuts | 19-22 ft. lbs. | |
Flywheel-to-Crankshaft Bolts | 51-55 ft. lbs. | |
Intake Manifold Bolts | 13-16 ft. lbs. | |
Main Bearing Bolts | 6mm Bolts | 3-4 ft. lbs. |
8mm Bolts | 17-20 ft. lbs. | |
10mm Bolts | 29-35 ft. lbs. | |
Oil Pan Bolts | 4 ft. lbs. | |
Oil Pump By-pass Spring Plug | 23-27 ft. lbs. | |
Oil Pump Pulley Nut | 13-15 ft. lbs. | |
Oil Pressure Switch, Sending Unit or Plug | 16-20 ft. lbs. | |
Piston Pin Access Plugs | 46-56 ft. lbs. | |
Rod Bearing Bolts | 29-31 ft. lbs. | |
Spark Plugs | 13-17 ft. lbs. | |
Thermostat Housing-to-Engine Bolts | 7 ft. lbs. | |
Timing Belt Cover Bolts | 48 inch lbs. | |
Timing Belt Idler Pulley Mounting Bolt | 32 ft. lbs. | |
Timing Belt Tensioner Mounting Bolts | 14 ft. lbs. | |
Valve Cover Bolts | 3-4 ft. lbs. | |
Water Pump Mounting Bolts | 7-8 ft. lbs. | |
Water Pump Pulley Mounting Nuts | 7-8 ft. lbs. | |
Turbocharger Components | ||
Component | Torque | |
EGR Pipe Bolts | 23-27 ft. lbs. | |
Turbocharger Mounting Bolts | 18-25 ft. lbs. | |
Turbocharger Oil Line Banjo Bolt | 11-13 ft. lbs. | |
Turbocharger Cooling Line Banjo Bolt | 16-18 ft. lbs. |
Fig. 1 Cylinder head bolt torque sequence-1.8L engine |
Fig. 2 Timing mark alignment-1.8L engine |
Fig. 3 Oil relief pipe and plug-1.8L engine |
Fig. 4 Firing order and cylinder location-1.8L engine |
If you have any questions, comments or suggestions, send an e-mail to: autospec@hotmail.com