Subaru Coupes, Sedans and Wagons 1985-96 2.5L Engine

2.5L (2457cc) DOHC 4Cyl
Component				Torque
Camshaft Bearing Cap Bolts				14.5 ft. lbs.
Camshaft Sprocket Bolts				58 ft. lbs.
Crankshaft Damper Bolt				91-97 ft. lbs.
Cylinder Head Bolts				NOTE
Exhaust Pipe-to-Engine Bolts				19-26 ft. lbs.
Flywheel-to-Crankshaft Bolts				51-55 ft. lbs.
Front Engine Mount Nuts				61 ft. lbs.
Idle Air Control Solenoid				57 inch lbs.
Intake Manifold Bolts				17-20 ft. lbs.
Main Bearing Bolts	6 and 8mm Bolts		Bolts #1-7	14-20 ft. lbs.
	6 and 8mm Bolts		Bolt #8	4.7 ft. lbs
	10mm Bolts			33-37 ft. lbs.
Oil Pan				3-4 ft. lbs.
Oil Pan Drain Plug				33-36 ft. lbs.
Oil Pump Mounting Bolts				56 inch lbs.
Piston Pin Access Plugs				46-56 ft. lbs.
Pitching Stopper Bolts		Body Side		49 ft. lbs.
Pitching Stopper Bolts		Engine Side		40 ft. lbs.
Rod Bearing Bolts				32-34 ft. lbs.
Spark Plugs				13-17 ft. lbs.
Starter Bolts				34-40 ft. lbs.
Thermostat Housing-to-Engine Bolts				52-61 inch lbs.
Throttle Body-to-Engine Bolts/Nuts				16 ft. lbs.
Timing Belt Cover Bolts				44 inch lbs.
Timing Belt Idler Bolt				29 ft. lbs.
Timing Belt Tensioner Bolts				18 ft. lbs.

If you have any questions, comments or suggestions, send an e-mail to: autospec@hotmail.com

Automotive Torque Specifications
Home	Subaru	Subaru Coupes Sedans and Wagons 1985-96

	NOTE	Step 1: Tighten all bolts to 22 ft. lbs.
		Step 2: Tighten all bolts to 51 ft. lbs.
		Step 3: Loosen all bolts, in reverse torque sequence, by 180°
		Step 4: Loosen all bolts, in reverse torque sequence again by 180°
		Step 5: Tighten bolts #1 and #2, in the torque sequence, to25 ft. lbs.
		Step 6: Tighten bolts #3,4,5 and #6, in the torque sequence, 11 ft. lbs.
		Step 7: Tighten all bolts, in torque sequence, by 80-90°
		Step 8: Tighten all bolts, in torque sequence, again by 80-90°